top of page

Numerical Investigation of Frontal Impact Response in an E-Rickshaw Chassis Using ANSYS Explicit Dynamics

Manan Sachdeva, Nipun Kothare
21/11/26

The frontal crash response of lightweight electric rickshaw (E-rickshaw) chassis structures remains an important area for numerical investigation. This study examined the impact response of a simplified tubular E-rickshaw chassis using ANSYS Workbench 2026 R1 Explicit Dynamics. Two frontal impact velocities, 18 km/h (5 m/s) and 36 km/h (10 m/s), were investigated against a stationary rigid barrier over a simulation duration of 75 ms. The 18 km/h case was evaluated using total displacement and equivalent von Mises stress contours, while the model-wide maximum stress-time histories were compared for both velocities. The displacement contours indicated that the response extended from the frontal tubular members into the lower chassis, vertical supports, roof frame, and passenger-compartment framework. The maximum recorded total displacement was approximately 1.66 mm; however, this quantity includes rigid-body motion and cannot be interpreted directly as structural crushing or occupant-compartment intrusion. The maximum numerical equivalent von Mises stresses reached approximately 1.98 GPa and 4.60 GPa for the 18 km/h and 36 km/h cases, respectively, with the higher-speed case exhibiting an earlier peak. These unusually high stress magnitudes require further verification of the material representation and numerical model. The simplified chassis-only configuration, idealised connections, and limited crash-response outputs also restrict the interpretation of the findings. The study therefore provides a preliminary comparison of numerical impact responses and identifies structural regions warranting further investigation rather than establishing quantitative crashworthiness or occupant protection.

bottom of page