top of page

Generating Electricity from Tuning Fork Resonance Using Electromagnetic Induction and Piezoelectricity

Aanshi Shah, Amrita Singh
21/11/26

Sound, a free and readily available resource, is underutilized as a source of energy. This work describes the design of a novel prototype that utilizes sympathetic resonance and electromagnetic induction to generate electricity from the vibrations of a tuning fork.. A prototype was developed that consisted of resonating 440 Hz tuning forks, a ping-pong ball with attached N35 magnets in contact with one of them, and an insulated copper wire with 100 turns through which the magnets passed after the vibrations of the sympathetically resonating tuning fork set the ball into motion as a slow pendulum. Upon producing a peak current of 0.7 mA, this design was subsequently modified and tested for increased voltage production through the addition of either an additional set of repelling magnets or a piezoelectric disc at the base of the coil. The model using repelling magnets did not produce a measurable voltage. In the prototype incorporating piezoelectricity, the effects of the diameter of the ball, the diameter of the magnets, and the number of magnets on voltage production were measured and determined. With the incorporation of piezoelectricity, the modified prototype produced a maximum voltage of 9.2 mV. In conclusion, electricity can be produced from the vibrations of a tuning fork upon a hammer strike by combining sympathetic resonance, electromagnetic induction, and piezoelectricity. This reflects a promising outlook on the use of sound as a renewable source of energy.

bottom of page