Pyrolysis and Hydrothermal Processing in the Processing of Plastic Waste: a Review and Comparative Analysis
Sunav Adhikari
21/11/26
Plastic waste pollution is a significant concern in today’s society, as only about 10% of global plastic waste is recycled. Chemical recycling technologies may offer solutions to plastic waste management. This review describes and analyzes methods of pyrolysis and hydrothermal processing, which can break down large polymers into valuable products, particularly energy-dense fuels and industrial monomers. Section 2 describes pyrolysis methods, where in fast and flash pyrolysis, electric Joule heating can convert plastics into an olefin-rich gas mixture. Aluminosilicate and metal oxide catalysts promote the formation of gasoline-range hydrocarbons. In slow pyrolysis, spent fluid catalytic cracking (FCC) catalysts can also enhance fuel properties and product yields. Section 3 describes hydrothermal processing methods, which can primarily be divided into subcritical and supercritical water treatments and low-pressure hydrothermal processing (LP-HTP). Supercritical water liquefaction (SCWL) can produce high oil yields (80-100%) and useful fuels, though it requires high pressures of at least 22.1 MPa. Supercritical water oxidation (SCWO) may be able to replace incineration as a cleaner method of energy recovery. LP-HTP can produce similar oil yields to SCWL, though it is less developed. Section 4 analyzes similarities and differences between pyrolysis and hydrothermal processing. SCWL and LP-HTP are most comparable to slow pyrolysis in temperatures and residence times. Mechanisms for the two are similar for addition polymers, though significantly different for the condensation polymer PET. Pyrolysis is significantly more developed industrially, with the plastic pyrolysis oil market having a value of approximately $700 million. Future research in these processes will help to remediate the issue of plastic waste pollution.
